How We Achieve the Cleansnapx Standard
A transparent look into our equipment, chemistry, and methodology. See the proof of quality through case studies from Prague apartments and offices.
The Forensic Eye for Clean
Vinohrady Office Lobby: Limestone Crisis
A critical meeting was scheduled for 9 AM, but the lobby featured a prominent coffee stain on pale limestone. The challenge: remove organic material without etching the stone or leaving residue.
Figure Note
We used a pH-neutral, non-abrasive stone cleaner with a microfiber mop. The area was extracted immediately to prevent water penetration. Result: Zero marking, ready for client arrival.
Vinohrady Apartment Kitchen: Grease Abatement
Grease and cooking aerosols coat cabinets and extractor hoods, creating a sticky biofilm. Standard soaps struggle, and scrubbing can damage finishes.
Caption
Industrial steam extraction operates at 150°C. This "dry vapor" loosens grease on contact, and our extractors remove 95% of residual moisture instantly, preventing mold risk.
Equipment Protocol
- • Karcher Puzzi 8/1 (extractor)
- • Miele Cat & Dog (HEPA vac)
- • Serpro Lava (oscillating scrubber)
All equipment serviced weekly; zero downtime.
Color-Coded Protocol
One color, one room. Zero cross-contamination. Prevents bathroom bacteria from entering kitchen spaces.
Microfiber cloths are washed at 90°C after each use.
HEPA Filtration
Standard vacuums recirculate dust. HEPA traps 99.97% of particulates. Essential for clients with allergies.
Dry Vapor Steam
150°C steam kills bacteria on contact. Our extractors remove 95% of moisture instantly, unlike DIY steamers.
pH-Neutral Cleaning
We avoid ammonia/bleach. Safer for pets, children, and surfaces like stone or wood.
The 3-Hour Deep-Clean Method
T-Minus 0: Assessment
Team lead conducts a walkthrough with the client. We use a digital floor plan to mark high-priority zones (e.g., stain on rug, grease in oven). This sets expectations and identifies delicate surfaces.
Hour 1: Top-Down Dust
Begin at the ceiling, cleaning fixtures, crown molding, and window frames. Work down to furniture and sills. Final dry vacuum of floors. No dust falls on cleaned surfaces.
Hour 2: Chemical & Mechanical
Pre-treatment of high-traffic areas. Steam extraction for upholstery, grout lines (oscillating brush), and kitchen grease. Floor washing (per surface type).
Hour 3: Detail & Verification
Baseboards, window sills, final vacuum pass. The "White Glove" inspection: Team lead uses a flashlight to check edges and corners. Client signs off digitally on our checklist.
Our Trade-Offs & What Changes Our Mind
Decision Criteria
Common Pitfalls (and How We Avoid Them)
Moisture Damage
Using too much water on wood. Our fix: pH-balanced cleaners with minimal moisture and immediate extraction.
Cross-Contamination
Using one rag for the whole apartment. Our fix: Strict color-coded protocol (blue for bath, green for kitchen, etc.).
Air Quality
Vacuuming without a HEPA filter. Our fix: All vacuums have sealed HEPA systems, serviced weekly.
Constraints & Assumptions
Our Service Assumptions
- • Client provides access & water/electricity.
- • Heavy personal items are cleared (unless otherwise arranged).
- • Surfaces are generally in good condition (i.e., not peeling paint).
What Changes This Plan?
- • Post-renovation dust (requires more time for taping vents).
- • Biohazard waste (requires specialized disposal).
- • Elevator scheduling (older Prague buildings).
Client Scenario: Moving Out of a Rental
A tenant in Žižkov needs to return a key to their landlord. They need a deep clean to meet the apartment condition clause. The constraint: they have only 24 hours before their final walkthrough. Our solution: We schedule a 3-hour slot, focus on high-impact areas (kitchen, bathroom, floors), and provide a post-clean report with photos for their documentation.
Mini-Scenario: The Office With a Senior Partner
Beat 1: The senior partner's office is deep-cleaned, but a lingering coffee scent remains.
Beat 2: Our team identifies the baseboard heater as the source—dust has baked into it.
Beat 3: We use a non-abrasive brush attachment on our vacuum for the heater, followed by a steam pass.
Outcome: The smell is gone, and the client is impressed by the attention to detail they didn't know they needed.
Ready for a Clearer Space?
See our work, understand our process, and get a clear quote. No surprises.
Address
Neklanova 106
128 00 Praha 2
Czechia
Contact
+420 241 401 828
[email protected]
Hours
Mon–Fri: 8:00–18:00
Sat-Sun: By appointment